NETSH WLAN Cheat Sheet

netsh wlan show interface
(Shows BSSID, Authentication Type, Encryption, Channel, Transmit/Receive rate, etc.)

netsh wlan show profiles
(Shows wlan profiles settings)

netsh wlan show networks mode=BSSID
(Shows all BSSIDs with Channel info and received signal strength)

Cisco AP Associated to Controller, but no clients connected

Ensure that "Admin Status" is set to Enabled.
Ensure radios are Enabled.

Ensure it is in local mode (not monitor mode).

Verify the country code is set correctly (some APs may be in UX or Universal mode).

Verify it is in the correct AP Group

How to Update Kali Sources List

Edit the /etc/apt/sources.list file

vi /etc/apt/sources.list

Type i to enter INSERT mode

Add the Kali Rolling Repository

deb http://http.kali.org/kali kali-rolling main contrib non-free

Hit ESC to exit INSERT mode

Type :wq to write changes and quit

Then update apt-get to have the new repository take effect.
apt-get update

How to Configure FreeRadius on Kali for 802.1X Authentication

Install FreeRadius on Linux
apt-get install Freeradius*

Define a Client (Wireless Controller)
vi /etc/freeradius/3.0/clients.conf

Type i to enter INSERT mode

client name {
ipaddr = <ip address>
secret = secret-password
}

Hit ESC to exit INSERT mode

Type :wq to save changes and exit

Define a User and Password

vi /etc/freeradius/3.0/users

username Cleartext-Password := "password"

Save changes and exit

Start the Radius Server in debugging mode
freeradius -X

Test the configuration
radtest username password localhost 0 testing123

*testing123 is the default password for "localhost"


To Enable PEAP:
Edit /etc/freeradius/3.0/mods-enabled/eap
vi /etc/freeradius/3.0/mods-enabled/eap
Set the default eap type to peap

Configure MSChapv2
vi /etc/freeradius/3.0/mods-enabled/mschap
Set "use_mppe" to yes
Set "require_encryption" to yes
Set "require_strong" to yes

Restart freeradius to have changes take effect
killall freeradius
freeradius -X

How to Delete Checkboxes that were Pasted into Excel

Click File > Options > Customize Ribbon
Enable Developer mode
Click the Developer tab
Click the Design Mode button
Highlight the checkbox and delete.

Configure Switch for WLC Link Aggregation

config t

int range fa0/47 - 48
switchport
channel-group 1 mode on

no shut

int port-channel 1
switchport
switchport trunk encap dot1q
switchport trunk native vlan x
switchport trunk allowed vlan x,y,z
switchport mode trunk
no shut

WireShark Capture Filter based on MAC Address

ether host <mac>